Skip to content



Boat Wraps are one of favorite specialties here at Autorama. We design, print and install all of our boat wraps in-house. We can wrap a boat in our facility or in your dry storage warehouse.  Small boat wraps to large boats, nothing is too big or too small. We sell and install both Avery Denison and 3M pre-colored wrap material. 

We’ve wrapped surf boats, bass boats, wave runners, pontoon boats, ski boats. Cut vinyl or full color custom printed vinyl is available. We can do a simple boat name in cut vinyl on your transom of FL license numbers on the side of your boat as well.

One of the big questions when it comes to Custom boat wraps is “What Does It Cost To Wrap My Boat?” The short answer is Custom Boat Wraps are based on the overall size of the wrap and the complexity of the installation. The installation generally 50% of the cost of the total cost of the wrap.

We take the extra time and material to make sure all the edges of your boat wrap are sealed tight to eliminate seepage. Wrap material has air channels built into the back side to facilitate the escape of air during the installation process, the problem is when water tries to creep up into the air channels. Our solution to this problem is to use a clear 3M seal tape and seal the edge of the printed wrap vinyl.